Sylph-D100 TPA3255 Mono/Stereo Amplifier Module (Ready to Run)

$132.00 USD Coming Soon

Mid-power chip-based class-D amplifier with sound improvements through optimization and careful parts selection.

The analog input can accept full balanced or single ended signals which can be configured by a solder jumper under the PCB. Single ended input is enabled by default unless otherwise requested.

A split supply is used in the opamp buffer section in order to delete the redundant input coupling caps in the frontend audio path. The opamp rail supplies are being generated on-board with positive and negative post regulators. Each opamp has a separate bulk capacitance on its positive and negative rails.

Use of bulk capacitance in AVDD supply, and various tweaks to improve the sound quality.

Use of voltage supervisor IC to avoid large turn on-off pops or clicks.

Input coupling caps layout can accomodate to 7.5mm x 7.5mm, 5mm pitch poly caps.

Can be configured as a mono PBTL on post LC filter (select mono PBTL on checkout).

Package Includes
1 pc Sylph-D100 stereo Ready to Run module.
2 pc female 2.54 mm 3 pin connector.

Specifications
Supply Voltage: 28V DC min to 48V DC max
Power (Stereo BTL): 80W-8Ω, 160W-4Ω
Power (Mono PBTL): 300W-2Ω
Input sensitivity - SE: 1V RMS
Input sensitivity - Balanced: 2V RMS
Input impedance: 10K Ω
Input configuration: SE / Balanced (solder jumper)
Load impedance: 4Ω or 8Ω
Idle dissipation: ~7W at 48V DC
Footprint: 133mm x 100mm x 45mm (L * W * H)
Number of PCB Layers: 2 layer copper
Overcurrent /short protection: Yes
Over voltage protection: Yes
Overheat protection: Yes
Turn on-off pop suppression: Yes
Gross packed weight: 400g

Recommended Power Supply
(NOT INCLUDED)
- 48V DC Single supply SMPS 350W or higher.
- DO NOT use power supply with split rails.
- Mean Well LRS-350-48
- Use 42V DC for linear supplies
- Do not exceed 48V DC supply

Shipping
Shipments are consolidated once a week. Kindly wait for the tracking info to become available. Courier is a European Postal affiliated company with normal shipping ETA of 5 to 8 weeks.

Feel free to contact us at:
support@jlelectronicsph.com

Kindly check your spam or junk folder if you haven't received any response. Thank you

Prices are subject to change without prior notice.

****

Share